--- header unit 0: primary ---
SIMPLE = T / conforms to FITS standard
BITPIX = -32 / array data type
NAXIS = 2 / number of array dimensions
NAXIS1 = 2000
NAXIS2 = 1128
COMMENT = '---------- OBSERVATION SECTION'
OBJECT = 'J0143+0725_dith1' / object name
EXPTIME = 5.998848 / [s] total exposure time
TELAPSE = 6.500020 / [s] elapsed time
EXPTIME1 = 0.499904 / [s] exposure time per frame
TFRAME = 0.500000 / [s] frame interval in seconds
DATA-FPS = 2.000000 / [Hz] frame per second
DATA-TYP = 'OBJECT' / data type (OBJECT,FLAT,DARK)
OBS-MOD = 'Imaging' / observation mode
FILTER = 'BLANK' / filter name
PROJECT = 'Supernova Survey' / project name
OBSERVER = 'Morokuma' / observer name
PIPELINE = 'wcs,stack,neo' / reduction pipeline templete
DATE = '2020-11-04T15:21:59' / date when FITS file was generated
DATE-OBS = '2020-11-04' / observation date
TIME-OBS = '15:21:52.750863' / exposure starting time
UTC = '2020-11-04T15:21:52.750863' / exposure starting date and time
UTC-EXP = '2020-11-04T15:21:47.761370' / onset time of exposure sequence
TIMESYS = 'UTC' / time system used in the header.
RA = '01:43:47.4' / right ascension of telescope pointing
DEC = '+07:25:39.0' / declination of telescope pointing
RADESYS = 'ICRS' / equatorial coordinate system
EQUINOX = 2000.000000 / equinox of celestial coordinate system
COMMENT = '---------- DATA SECTION'
EXP_ID = 394000 / exposure serial number
QUAD_ID = 3 / Tomo-e Gozen Module ID number
DET_ID = 315 / CMOS detector ID number
CMOS_ID = 'FK1001087' / CMOS serial ID number
FRAME_ID = 'TMQ3202011040039400015' / FITS file unique ID
BUNIT = 'ADU' / unit of original pixel values
SANITY = 12.0851526260376 / reserved keyword for sanity check
MAGZPT = 25.000000 / magnitude zero point
MAGZERR = 0.000000 / standard error of magnitude zero point
MAGZNOBJ = 0 / number of objects to derive magnitude zero poin
FWHM = 0.000000 / FWHM of point sources
BGCOUNT = 364.5869012486061 / average background counts
BGMEDIAN = 360.1473999023438 / median background counts
BGSTDDEV = 40.14847882588705 / standard deviation of background counts
COMMENT = '---------- OBSERVATORY SECTION'
OBSERVAT = 'Kiso Observatory' / observatory name
TELESCOP = 'Kiso Schmidt' / telescope name
INSTRUME = 'Tomo-e Q1+Q2+Q3+Q4' / instrument name
F-RATIO = 3.100000 / monochromatic F-Ratio
FOC-LEN = 3300 / [mm] focal length of the telescope
FOC-VAL = 28.120000 / [mm] encoder value of the focus unit
OBSGEO-B = 35.797258 / [deg] telescope geodetic latitude (WGS84)
OBSGEO-L = 137.625346 / [deg] telescope geodetic longitude (WGS84)
OBSGEO-H = 1168.000000 / [m] telescope altitude above the geoid surface
AZIMUTH = 226.600000 / [deg] telescope azimuthal position
ZD = 37.030000 / [deg] telescope zenith distance
ALTITUDE = 52.970000 / [deg] telescope altitude angle
HA = '01:45:53.0' / hour angle
LST = '03:29:41.0' / local sidereal time
DOMEPOS = 227.300000 / [deg] dome position angle
DOMESLIT = 'OPEN' / dome slit status
TEL-MODE = 'Tracking:ON' / telescope operation mode
MCOVER = 'OPEN' / mirror cover status
FLATLAMP = 'OFF' / dome flat lamp status
FLAT-ND = 'ND1.8' / dome flat ND filter
COMMENT = '---------- WEATHER SECTION'
TMP_TEL = 4.700000 / [C] telescope inside tempearture
TMP_DOME = 1.500000 / [C] dome inside temperature
TMP_VWS = -1.600000 / [C] weather center temperature
HUM_TEL = 67.000000 / [%] telescope inside humidity
HUM_DOME = 64.000000 / [%] dome inside humidity
HUM_VWS = 86.200000 / [%] weather center humidity
SKYTEMP = -27.860000 / [C] sky temperature
VISRANGE = 5882.000000 / [m] zenith visibility
WIND_VEL = 2.900000 / [m/s] wind velocity
WIND_DIR = 269.000000 / [deg] wind direction
ATMOS = 892.800000 / [hPa] atomosphere pressure
COMMENT = '---------- INSTRUMENT SECTION'
GAINCNFG = 'HIGH' / sensor gain setting
GAIN = 0.230000 / [electron/ADU] AD conversion factor
ND = 1 / ND filter by electronic shutter
RNOISE = 1.900000 / [electron] readout noise
FULLWELL = 6400.000000 / [electron] full well in electrons
DCURRENT = 1.100000 / [electron/pix/s] dark current in electrons
DEBIAS = T / auto debias enabled
TRIMMING = T / auto image trimming enabled
BURST = F / high speed mode enabled
Q1_TBODY = 10.500000 / [C] Q1 inside temperature
Q1_TELEC = 18.700000 / [C] Q1 electronics temperature
Q1_TAMB = 10.300000 / [C] Q1 ambient temperature
Q1_HUMID = 9.400000 / [%] Q1 inside humidity
Q2_TBODY = 99.000000 / [C] Q2 inside temperature
Q2_TELEC = 99.000000 / [C] Q2 electronics temperature
Q2_TAMB = 99.000000 / [C] Q2 ambient temperature
Q2_HUMID = 99.000000 / [%] Q2 inside humidity
Q3_TBODY = 99.000000 / [C] Q3 inside temperature
Q3_TELEC = 99.000000 / [C] Q3 electronics temperature
Q3_TAMB = 99.000000 / [C] Q3 ambient temperature
Q3_HUMID = 99.000000 / [%] Q3 inside humidity
Q4_TBODY = 99.000000 / [C] Q4 inside temperature
Q4_TELEC = 99.000000 / [C] Q4 electronics temperature
Q4_TAMB = 99.000000 / [C] Q4 ambient temperature
Q4_HUMID = 99.000000 / [%] Q4 inside humidity
VOLA_7VA = 8.500000 / [V] analog+7V output voltage (a)
CURA_7VA = 11.200000 / [A] analog+7V output current (a)
VOLA_5VA = 5.990000 / [V] analog+5V output voltage (a)
CURA_5VA = 4.980000 / [A] analog+5V output current (a)
VOLA_7VB = 8.500000 / [V] analog+7V output voltage (b)
CURA_7VB = 11.200000 / [A] analog+7V output current (b)
VOLA_5VB = 6.000000 / [V] analog+5V output voltage (b)
CURA_5VB = 5.000000 / [A] analog+5V output current (b)
VOLD_5V = 5.107000 / [V] ditital+5V output voltage
CURD_5V = 39.930000 / [A] ditital+5V output current
FMTTYPE = 'TOMOE-IMAGE-RAW' / data format type
FMTVER = 0.200000 / data format type version
VERSION = 0.507000 / FITS header version
COMMENT = '---------- WCS SECTION'
CTYPE1 = 'RA---TAN-SIP' / pixel coordinate system
CTYPE2 = 'DEC--TAN-SIP' / pixel coordinate system
CRPIX1 = 1088.0802002 / pixel coordinate of the reference point
CRPIX2 = 660.928642273 / pixel coordinate of the reference point
CRVAL1 = 26.3722117838 / RA at ref point
CRVAL2 = 3.65730306621 / DEC at ref point
CUNIT1 = 'deg' / Units used in both CRVAL1 and CDELT1
CUNIT2 = 'deg' / Units used in both CRVAL2 and CDELT2
CD1_1 = 0.000330258332809 / WCS transformation matrix element
CD1_2 = -1.22900178873E-06 / WCS transformation matrix element
CD2_1 = -1.21611769062E-06 / WCS transformation matrix element
CD2_2 = -0.000330308327445 / WCS transformation matrix element
LONPOLE = 180.000000 / [deg] Native longitude of celestial pole
LATPOLE = 0.000000 / [deg] Native latitude of celestial pole
WCSVALID = T
A_ORDER = 2
A_0_0 = 0
A_0_1 = 0
A_0_2 = 1.10095306544E-06
A_1_0 = 0
A_1_1 = -7.2756757597E-07
A_2_0 = 5.02810610119E-07
AP_ORDER = 2
AP_0_0 = -1.77864138874E-05
AP_0_1 = -8.05856035934E-07
AP_0_2 = -1.10090206098E-06
AP_1_0 = 6.72773843069E-07
AP_1_1 = 7.27215962218E-07
AP_2_0 = -5.02789694732E-07
B_ORDER = 2
B_0_0 = 0
B_0_1 = 0
B_0_2 = -1.59516908811E-07
B_1_0 = 0
B_1_1 = 6.76303961816000E-07
B_2_0 = 6.95602469909E-09
BP_ORDER = 2
BP_0_0 = 3.49617445376E-05
BP_0_1 = 4.26837507668E-07
BP_0_2 = 1.5935566567E-07
BP_1_0 = -8.92983002117E-08
BP_1_1 = -6.76286896131E-07
BP_2_0 = -7.03541544457E-09
HISTORY [pipeline] version: master:021b3b18
HISTORY [reduce] darkframe subtraction: 00190911
HISTORY [reduce] flatframe correction: 00046547
HISTORY [stacking] chopped mean stacking