Skip to content

Header Sample (Stacked Image)

This page presents a sample of the FITS header (ver 0.730) of Stacked Image. The Stacked Image contains a single Header Data Unit of TOMOE-IMAGE-STACK, which contains overall information of an exposure.

Item Value
Frame ID TMQ1202301020086026211
Header version 0.730

Primary HDU

Item Value
Format type TOMOE-IMAGE-STACK
Format version 1.00
SIMPLE  =                    T / conforms to FITS standard
BITPIX  =                  -32 / array data type
NAXIS   =                    2 / number of array dimensions
NAXIS1  =                 2000
NAXIS2  =                 1128
COMMENT = '---------- OBSERVATION SECTION'
OBJECT  = 'J0322+5925_dith1'   / object name
EXPTIME =    8.498368000000001 / [s] net integration time
TELAPSE =         9.5000200000 / [s] elapsed time
EXPTIME1=         0.4999040000 / [s] exposure time per frame
TFRAME  =         0.5000000000 / [s] frame interval in seconds
TRLSTEP =         0.0016590000 / [s] interval per reset line feeding (4 lines)
TRLSTEP1=         0.0004147500 / [s] reset line feeding time per line
DATA-FPS=         2.0000000000 / [Hz] frame per second
DATA-TYP= 'OBJECT'             / data type (OBJECT,FLAT,DARK)
OBS-MOD = 'Imaging'            / observation mode
FILTER  = 'BLANK'              / filter name
PROJECT = 'All-Sky Survey'     / project name
OBSERVER= 'T. Morokuma'        / observer name
PIPELINE= 'wcs,stack,neo'      / reduction pipeline templete
DATE    = '2023-01-02T09:48:24' / date when FITS file was generated
DATE-OBS= '2023-01-02'         / observation date
TIME-OBS= '09:48:14.665023'    / exposure starting time
UTC     = '2023-01-02T09:48:14.665023' / exposure starting date and time
UTC-EXP = '2023-01-02T09:48:09.900698' / onset time of exposure sequence
GPS-UP  = '2023-01-02T09:48:14.665023' / GPS trigger time::rising edge
GPS-DOWN= '2023-01-02T09:09:19.287105' / GPS trigger time::falling edge
TIMESYS = 'UTC'                / time system used in the header.
RA      = '03:22:18.7'         / right ascension of telescope pointing
DEC     = '+59:25:16.0'        / declination of telescope pointing
RADESYS = 'ICRS'               / equatorial coordinate system
EQUINOX =      2000.0000000000 / equinox of celestial coordinate system
COMMENT = '---------- DATA SECTION'
EXP_ID  =               860262 / exposure serial number
QUAD_ID =                    1 / Tomo-e Gozen Module ID number
DET_ID  =                  111 / CMOS detector ID number
CMOS_ID = 'FK1000123'          / CMOS serial ID number
FRAME_ID= 'TMQ1202301020086026211' / FITS file unique ID
RED_ID  =             64636508 / unique serial number of reduction
DARK_ID =                   -1 / serial number of dark frame
FLAT_ID =                   -1 / serial number of flat frame
BUNIT   = 'ADU'                / unit of original pixel values
SANITY  =    11.66844940185547 / standard deviation of reference pixels
WCSVALID=                    T / validity of WCS parameters
WCSORIG = 'Gaia EDR3'          / catalog used for WCS calibration
MAGZPT  =        25.0000000000 / magnitude zero point
MAGZERR =         0.0000000000 / standard error of magnitude zero point
MAGZNOBJ=                    0 / number of objects to derive MAGZPT
FWHM    =         0.0000000000 / FWHM of point sources
BGCOUNT =    598.6279085253572 / average background counts
BGMEDIAN=    594.6649169921875 / median background counts
BGSTDDEV=    52.16962178548177 / standard deviation of background counts
REDVER  = 'astrometry:b6c7d5cd' / data reduction pipeline version
FMTTYPE = 'TOMOE-IMAGE-STACK'  / data format type
FMTVER  =                  1.0 / data format type version
VERSION =         0.7300000000 / FITS header version
COMMENT = '---------- OBSERVATORY SECTION'
OBSERVAT= 'Kiso Observatory'   / observatory name
TELESCOP= 'Kiso Schmidt'       / telescope name
INSTRUME= 'Tomo-e Q1+Q2+Q3+Q4' / instrument name
F-RATIO =         3.1000000000 / monochromatic F-Ratio
FOC-LEN =                 3300 / [mm] focal length of the telescope
FOC-VAL =        28.1200000000 / [mm] encoder value of the focus unit
OBSGEO-B=        35.7972583860 / [deg] telescope geodetic latitude (WGS84)
OBSGEO-L=       137.6253456800 / [deg] telescope geodetic longitude (WGS84)
OBSGEO-H=      1168.0000000000 / [m] telescope altitude above the geoid surface
AZIMUTH =        26.2000000000 / [deg] telescope azimuthal position
ZD      =        28.5537000000 / [deg] telescope zenith distance
ALTITUDE=        61.4463000000 / [deg] telescope altitude angle
HA      = '-01:36:28.1'        / hour angle
LST     = '01:45:50.5'         / local sidereal time
DOMEPOS =        27.0000000000 / [deg] dome position angle
DOMESLIT= 'OPEN'               / dome slit status
TEL-MODE= 'Tracking:ON'        / telescope operation mode
MCOVER  = 'OPEN'               / mirror cover status
FLATLAMP= 'OFF'                / dome flat lamp status
FLAT-ND = 'ND1.8'              / dome flat ND filter
COMMENT = '---------- WEATHER SECTION'
TMP_TEL =         5.0000000000 / [C] telescope inside tempearture
TMP_DOME=        -1.0000000000 / [C] dome inside temperature
TMP_VWS =        -4.1000000000 / [C] weather center temperature
HUM_TEL =        40.0000000000 / [%] telescope inside humidity
HUM_DOME=        41.0000000000 / [%] dome inside humidity
HUM_VWS =        60.7000000000 / [%] weather center humidity
SKYTEMP =       -34.2100000000 / [C] sky temperature
VISRANGE=      5660.0000000000 / [m] zenith visibility
WIND_VEL=         3.2000000000 / [m/s] wind velocity
WIND_DIR=       315.0000000000 / [deg] wind direction
ATMOS   =       888.6000000000 / [hPa] atomosphere pressure
COMMENT = '---------- INSTRUMENT SECTION'
GAINCNFG= 'HIGH'               / sensor gain setting
GAIN    =                 3.91 / [electron/ADU] effective AD conversion factor
ND      =                    1 / ND filter by electronic shutter
RNOISE  =   0.4608176875690326 / [electron] effective readout noise
FULLWELL=      6400.0000000000 / [electron] full well in electrons
DCURRENT=         1.1000000000 / [electron/pix/s] dark current in electrons
DEBIAS  =                    T / auto debias enabled
TRIMMING=                    T / auto image trimming enabled
BURST   =                    F / high speed mode enabled
Q1_TBODY=         7.5000000000 / [C] Q1 inside temperature
Q1_TELEC=        18.7000000000 / [C] Q1 electronics temperature
Q1_TAMB =         8.7000000000 / [C] Q1 ambient temperature
Q1_HUMID=        11.0000000000 / [%] Q1 inside humidity
Q2_TBODY=        99.0000000000 / [C] Q2 inside temperature
Q2_TELEC=        99.0000000000 / [C] Q2 electronics temperature
Q2_TAMB =        99.0000000000 / [C] Q2 ambient temperature
Q2_HUMID=        99.0000000000 / [%] Q2 inside humidity
Q3_TBODY=        99.0000000000 / [C] Q3 inside temperature
Q3_TELEC=        99.0000000000 / [C] Q3 electronics temperature
Q3_TAMB =        99.0000000000 / [C] Q3 ambient temperature
Q3_HUMID=        99.0000000000 / [%] Q3 inside humidity
Q4_TBODY=        99.0000000000 / [C] Q4 inside temperature
Q4_TELEC=        99.0000000000 / [C] Q4 electronics temperature
Q4_TAMB =        99.0000000000 / [C] Q4 ambient temperature
Q4_HUMID=        99.0000000000 / [%] Q4 inside humidity
VOLA_7VA=         8.5000000000 / [V] analog+7V output voltage (a)
CURA_7VA=        13.8000000000 / [A] analog+7V output current (a)
VOLA_5VA=         5.9900000000 / [V] analog+5V output voltage (a)
CURA_5VA=         5.0500000000 / [A] analog+5V output current (a)
VOLA_7VB=         8.5000000000 / [V] analog+7V output voltage (b)
CURA_7VB=        13.6000000000 / [A] analog+7V output current (b)
VOLA_5VB=         6.0000000000 / [V] analog+5V output voltage (b)
CURA_5VB=         5.0500000000 / [A] analog+5V output current (b)
VOLD_5V =         5.1050000000 / [V] ditital+5V output voltage
CURD_5V =        42.1700000000 / [A] ditital+5V output current
COMMENT = '---------- WCS SECTION'
CTYPE1  = 'RA---TAN-SIP'       / pixel coordinate system
CTYPE2  = 'DEC--TAN-SIP'       / pixel coordinate system
CRPIX1  =        936.666213989 / pixel coordinate of the reference point
CRPIX2  =        253.225708961 / pixel coordinate of the reference point
CRVAL1  =        49.3764813772 / RA at ref point
CRVAL2  =        59.9893419428 / DEC at ref point
CUNIT1  = 'deg'                / Units used in both CRVAL1 and CDELT1
CUNIT2  = 'deg'                / Units used in both CRVAL2 and CDELT2
CD1_1   =     0.00033025519788 / WCS transformation matrix element
CD1_2   =     5.7068823189E-06 / WCS transformation matrix element
CD2_1   =    5.79072412749E-06 / WCS transformation matrix element
CD2_2   =   -0.000330170302893 / WCS transformation matrix element
LONPOLE =       180.0000000000 / [deg] Native longitude of celestial pole
LATPOLE =         0.0000000000 / [deg] Native latitude of celestial pole
A_ORDER =                    2
A_0_0   =                    0
A_0_1   =                    0
A_0_2   =    4.12973206516E-07
A_1_0   =                    0
A_1_1   =    7.33048629536E-08
A_2_0   =   -1.21657945839E-08
AP_ORDER=                    2
AP_0_0  =    4.61326919667E-06
AP_0_1  =   -5.85758922042E-08
AP_0_2  =   -4.12772390188E-07
AP_1_0  =    2.48285928524E-11
AP_1_1  =   -7.32482894526E-08
AP_2_0  =    1.21320157223E-08
B_ORDER =                    2
B_0_0   =                    0
B_0_1   =                    0
B_0_2   =     2.1495693933E-07
B_1_0   =                    0
B_1_1   =    1.22204016006E-07
B_2_0   =   -1.32295498196E-07
BP_ORDER=                    2
BP_0_0  =    2.66443010433E-06
BP_0_1  =   -3.35735953382E-08
BP_0_2  =   -2.14825110474E-07
BP_1_0  =   -6.02715827416E-09
BP_1_1  =   -1.22225336339E-07
BP_2_0  =    1.32273519877E-07
COMMENT ---------- ASTROMETRY SECTION
COMMENT -- blind solver parameters: --
COMMENT Index(0): /usr/share/astrometry/gaia_edr3_07_03.fits
COMMENT Index(1): /usr/share/astrometry/gaia_edr3_06_03.fits
COMMENT Index(2): /usr/share/astrometry/gaia_edr3_05_03.fits
COMMENT Index(3): /usr/share/astrometry/gaia_edr3_04_03.fits
COMMENT Index(4): /usr/share/astrometry/gaia_edr3_03_03.fits
COMMENT Index(5): /usr/share/astrometry/gaia_edr3_02_03.fits
COMMENT Index(6): /usr/share/astrometry/gaia_edr3_01_03.fits
COMMENT Index(7): /usr/share/astrometry/gaia_edr3_00_03.fits
COMMENT Field name: ./TMQ1202301020086026211.axy
COMMENT Field scale lower: 0.18 arcsec/pixel
COMMENT Field scale upper: 324 arcsec/pixel
COMMENT X col name: X
COMMENT Y col name: Y
COMMENT Start obj: 0
COMMENT End obj: 10
COMMENT Solved_in: (null)
COMMENT Solved_out: ./TMQ1202301020086026211.solved
COMMENT Solvedserver: (null)
COMMENT Parity: 0
COMMENT Codetol: 0.01
COMMENT Verify pixels: 0.2 pix
COMMENT Maxquads: 0
COMMENT Maxmatches: 0
COMMENT Cpu limit: 300.000000 s
COMMENT Time limit: 0 s
COMMENT Total time limit: 0 s
COMMENT Total CPU limit: 300.000000 s
COMMENT Tweak: yes
COMMENT Tweak AB order: 2
COMMENT Tweak ABP order: 2
COMMENT --
COMMENT -- properties of the matching quad: --
COMMENT index id: 5002
COMMENT index healpix: 3
COMMENT index hpnside: 2
COMMENT log odds: 3050.19
COMMENT odds: inf
COMMENT quadno: 0
COMMENT stars: 0,0,0,0
COMMENT field: 0,0,0,0
COMMENT code error: 0
COMMENT nmatch: 359
COMMENT nconflict: 0
COMMENT nfield: 400
COMMENT nindex: 548
COMMENT scale: 1.18895 arcsec/pix
COMMENT parity: 0
COMMENT quads tried: 0
COMMENT quads matched: 0
COMMENT quads verified: 0
COMMENT objs tried: 1
COMMENT cpu time: 1.724
COMMENT --
HISTORY [pipeline] reduction_id: 64636508
HISTORY [pipeline] version: astrometry:b6c7d5cd
HISTORY [reduce] reference pixels are chopped off.
HISTORY [pipeline] stats_id: 57766149
HISTORY [reduce] dark subtraction: 00634886
HISTORY [reduce] flat correction: 00130425
HISTORY [wcs] Created by the Astrometry.net suite.
HISTORY [wcs] For more details, see http://astrometry.net.
HISTORY [wcs] Git URL https://github.com/dstndstn/astrometry.net
HISTORY [wcs] Git revision 0.72
HISTORY [wcs] Git date Mon_Jul_10_14:37:28_2017_-0400
HISTORY [wcs] This WCS header was created by the program "blind".
HISTORY [stacking] chopped mean stacking